How to Auto Tune/ Blind Scan TV Channels in MPEG-2 Set-Top Box?

Here we are telling you that the method of scanning MPEG-2 Set-Top Box. We will try to scan DD Free dish TV channels by Auto Scan function, we will also try to tune Free dish Box by manually tuning.

If the given below image is not matching with your current free-to-air Set-top box's software, then you can provide us your Set-top box model number in your comment, we will try to post-installation procedure as soon as possible.

Installation Steps

• 1. Program Setup
• 2. Add New Program
• 3. Antenna Setup
• 4. Auto Scan
• 5. 22KHZ Setting

You can see the settings DD Free dish MPEG-2 Set-Top Box

Program Setup -

By pressing the button "Menu" given on your remote, you will get the window shown below,

After that go to "Program Set-up" and click "OK".

Add New Program -

After the window of "Program Set-You" opens, you go to "Auto-Scan" Auto Scan

Antenna Setup -

After the window of "Auto-Scan" opens, you go to "Antenna-Settings" (Antenna Setup).

Now after opening the "Antenna Set-up" window, fill the settings in your set-top box as in the photo above and save the settings with the remote key EXIT.

Auto Scan -

As soon as your settings are saved you will be back to the "Auto-scan" window again. After that change the settings like in the above photos and tune by using the "OK" button from the remote.

Whatever the name of the satellite remains, the LNB frequency should be (09750-10600)

Now your set-top box will automatically search and save all the TV channels.

Hope, Now you will receive all the TV channels, Now press OK and Enjoy DD Free dish channels.

Please note - Some set-top boxes have a separate function in auto scanning, you can set their settings like this. -

If your set-top box does not have "Antenna Settings" then do not panic, you can do the settings according to the above picture. Once you tune "22K" by "OFF" and once 22K by "On".

With this, you will get more channels on DD Free Dish. You can tune the LNB frequency by 05150-05150 or 09750-10600.

It depends on the quality of your set-top box, which LNB frequency will be tuned quickly and accurately.

Now you wait for some time till your set-top box can search 100% of the channels.

If still, you are facing any problems then you can tell through the comment. Or if you are using another set-top box, then you can see the setting of other MPEG-4 set-top boxes by clicking here. 

FAQs- 

What is 22K in the free dish?

For example, when you input TP 11090 the receiver switches 22k to off to use 09750 LNB Frequency, and when you input 12688 (Dish TV Home Frequency) STB knows it sends the 22k tone for use of 10600 LNB frequency.

But if you are using a local/old traditional MPEG-2 Box, then you have to enable 22K tone manually to switch your LNB to work for 10600 Local Oscillators.

Modern receivers come with a "universal" LNB setting, SO the STB automatically turns 22k tone on and off, depending on the frequency you input, No need for selecting a 22k on or off in those. for information about the 22KHZ switch, you can check here.

What is the frequency of the MPEG-2 channel in DD Free Dish?

You can find the DD Free dish MPEG-2 channel frequency list here.

How to install dd free dish set-top box? -

• Know, How to scan the mpeg4 set-top box?
• How do scan or tune MPEG-2 Set-Top Box?
• How to scan or tune the HD FTA Set-Top Box?

Also Read -

How can I improve my LNB signal quality?